| Customization: | Available |
|---|---|
| After-sales Service: | Provide Installation and Commissioning Guidance. |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The T530 steam turbine is a single - stage back - pressure steam turbine. It has a velocity - compounded stage impeller with an impeller pitch circle diameter of 800 millimeters. The rated speed of the main shaft is 3000 revolutions per minute, and the power range is 300 - 1500 kKW. A gearbox can be installed according to user requirements to achieve speed change. The main feature of this model is to use superheated steam as the steam source to drive rotating machinery to do work, realizing the cascade utilization of energy to achieve the purpose of energy conservation and consumption reduction.
Overall dimension drawing
Cross-sectional drawing
Optimized design
Steam Turbine Body
| Item | Unit | Data |
| Product Code | T530 | |
| Rated Speed (Gearbox Reduction) | r/min | 3000 |
| Number of Turbine Stages | 1 regulation stage | |
| Governor Type | PLC Regulation | |
| Overspeed Protection Method | Two-out-of-three electrical overspeed protection + mechanical overspeed protection | |
| Overspeed Protection Actuation Speed | Rated speed × (1.09 - 1.11) | |
| Overspeed Protection Response Time | s | <0.5 |
| Vibration Value at Rated Speed | mm | ≤0.03 |
| Vibration Value at Critical Speed | mm | ≤0.15 |
| Maximum Axial Displacement | mm | ±0.4 |
| Weight | t | 3.1 |
| Bearing Lubrication Type | Forced lubrication | |
| Bearing Alarm Temperature | ºC | 85 |
| Turbine Dimensions (Length × Width × Height) | mm | 1900×1450×1540 |
| Turbine Center Height (from Operating Platform) | mm | 960 |
| Steam Seal Type | Comb-Tooth Labyrinth Seal | |
| Noise Level | dB | ≤85 |
| Unit Continuous Operation Time | hr/year | 8000 |
| Item | Unit | Data | |
| Oil Station | Flow rate | L/min | 63~125 |
| Oil Pump Configuration | Oil pressure: Adjustable from 0.3 to 1.0 MPa Two AC oil pumps, one DC oil pump |
||
| Seal steam heater | Heat Transfer Area | m2 | 15 |
| Cooling Water Flow Rate | t/h | 35 | |
| Cooling Water Pressure | MPa | 0.2~0.4 | |
| Cooling Water Temperature (Normal/Maximum) | ºC | 27/33 | |
Emergency Shut-off Device
The emergency shut-off device is a protective mechanism that prevents the rotor from exceeding the allowable rotational speed, installed on the main oil pump casing connected to the main shaft. The emergency shut-off device used in this unit is a centrifugal flyweight type, which has an eccentric weight mounted radially on the main oil pump casing. At normal rotational speeds, a spring force balances it. When the unit's speed exceeds the rated speed by 9-11%, the flyweight is thrown out, causing the emergency shut-off throttle to disengage and activate.
){kind=link}